PDA

View Full Version : Technic 1200 RCA Cable replacment? What cable?


Joe.G
10-16-2012, 06:23 PM
Hi, I want to replace the RCA Cables on my 1200's since I have them apart,

I have a set of these , http://www.amazon.com/gp/product/B000N7HT4K/ref=oh_details_o00_s00_i01 and also some monster cables, are these any good to use? If not do you have any other suggestions. Thanks
Synergy
10-16-2012, 07:24 PM
just cutting and soldering. just get some good quality, thick rca cables :)
Joe.G
10-16-2012, 07:47 PM
Been looking there are so many cables out there, Don't know which ones to get
Joe.G
10-17-2012, 07:40 AM
I was thinking of the Hosa Beatport or there Pro Stereo
How do I find out the what has the lowest Capacitance?

Is the RCA I posted in the first link any good?

http://www.hosatech.com/products/437651?&n=0&va=t
sixtysix
10-17-2012, 02:24 PM
I'd go with some standard Hosa cables with gold connectors.... they're cheap and simple.
Joe.G
10-17-2012, 03:08 PM
I went with these, http://www.hosatech.com/product/437651/HRR-010X2/_/Pro_Stereo_Interconnect%2C_Dual_REAN_RCA_to_Same%2 C_10_ft

I got it for $20.00 ten foot ill do both tables, I called Hosa and they said the only difference between the Pro Stereo and the Beatport was color.

Are these a good choice?

What is a good Length to make them?
djpenguin
10-17-2012, 08:12 PM
I went with these, http://www.hosatech.com/product/437651/HRR-010X2/_/Pro_Stereo_Interconnect%2C_Dual_REAN_RCA_to_Same%2 C_10_ft

I got it for $20.00 ten foot ill do both tables, I called Hosa and they said the only difference between the Pro Stereo and the Beatport was color.

Are these a good choice?

What is a good Length to make them?

Cables are cables, the ones you linked look like they're decently constructed, so they should be fine. Make the cable length the same as the OEM cables or shorter. Remember that they're passing a very faint signal (-42dB, IIRC), so long cable runs will introduce extra interference and noise.
DennisBdrmDJ 2.0
10-17-2012, 10:10 PM
you should have gone, with the Monsters.,...........http://serve.mysmiley.net/indifferent/indifferent0028.gif (http://www.blueislandsdiving.com) just waiting for some fool to flame me.
Joe.G
10-18-2012, 08:57 AM
What is the length of the stock cables, Mine have been replaced already.
djpenguin
10-18-2012, 02:09 PM
What is the length of the stock cables, Mine have been replaced already.

It's somewhere between 48 and 54 inches, though I don't recall the exact length.
VjQue
10-18-2012, 02:10 PM
Don't get to thick cables.

I just fixed a friend who went with thick monster cables and who Webber did them didn't put the cable lock back on and they ripped right off the board.

Had to buy a new board and rcas.

I just got standard nice quality cords from the 99 cent mom and pop store got $3.99 they are 6 ft cutin half to 3ft clear , blue & red.

I also put the cable lock back on.
DjMarkyG
03-13-2014, 05:01 AM
If you need a step by step, or a vid tutorial check out mines. It should be a easy task and save u lots of $$$ http://djmarkyg.wordpress.com/2014/03/06/replacing-rca-cables-and-self-grounding-technics-1200-turntables/
myndgruv
03-13-2014, 02:27 PM
you may as well internally ground them too while you have it apart.

I have the beatport ones and they work great. 10 footer cut in half
DjMarkyG
03-19-2014, 06:23 PM
you may as well internally ground them too while you have it apart.

I have the beatport ones and they work great. 10 footer cut in half

Yea that tutorial that I made shows you how to self ground the turntables too. Makes my mobile gigs one step less lol